GDS-1102B Digital Storage Oscilloscope (Open-Box)

Specs:

• 100MHz, 2 Channel

Includes: User manual CD, power cord, GTP-100B-4 100MHz Passive Probe

GDS-1000B Series Features:

• 200/100/70MHz bandwidth selections, 2ch input
• 100/70/50MHz bandwidth selections, 4ch input
• 1GSa/s maximum sampling rate
• 10M maximum memory depth for each channel
• 7-inch 800 x 480 WVGA LCD display
• 256 color gradient display function to strengthen waveform performance
• I2C/SPI/UART/CAN/LIN serial bus trigger and decoding functions
• 1Mpts FFT frequency domain signal display
• Zero Key function for horizontal time, vertical voltage and triggering
• Compact and innovative exterior design
• USB 2.0 host/device port

GDS-1000B Series Models:

Diversified Selections at Entry-Level Prices
The robust functional performance of the GDS-1000B series makes it an economical oscilloscope that allows users to enjoy the fun and value which is precisely the emerging mission of the test and measurement industry that GW Instek works relentlessly to achieve.

Complete Technology Integration
For mathematical analysis mode, 1 Mpts FFT signal display makes the dull frequency domain signal analysis more delicate. Diversified trigger functions, X-Y mode analysis, and Go/NoGo function arm the GDS-1000B series oscilloscope with higher level measurement technologies. The GDS-1000B series oscilloscope also provides OpenWave connection software, which allows you to conduct waveform observation and data storage controlled by remote PC. Moreover, this oscilloscope series features an innovative and compact design.

256-Color Gradient Display
With respect to the waveform display technology, the GDS-1000B series oscilloscope is capable of displaying 256 color gradients which can delineate the profound gradational fluctuations — recreating the analog oscilloscope display capability. When a multi-layer video signal is input, the GDS-1000B series, with 256 color gradient display, has the ability to precisely reveal the colored burst signal and to show details of layers with the brightness.

Data Log Function
The GDS-1000B series oscilloscope has the data log function option, allowing you to observe and record waveform changes over a long period of time. The data log function can set data storage time and interval based on the test requirements. Record time can be set from five minutes to 100 hours, at intervals as short as five seconds. Data log formats include waveform and point data in CSV file and can be saved to USB, GDS-1000B or a remote computer via LAN.

36 measurement parameters
The GDS-1000B series oscilloscope is equipped with 36 different automatic measurement parameter functions. After obtaining measured waveforms, you can select different measurement parameters per your measurement requirements. The GDS-1000B series shows eight sets of different measurement parameters simultaneously on the bottom of the screen. You can also elect to show all 36 parameters if desired. This is a very convenient measurement tool for the preparation of engineers' reports, and students' dissertations.