TA095 Single-Axis IEPE Accelerometer

The TA095 is a single-axis IEPE accelerometer that is suitable for use in a wide range of applications. It can be used with any suitable device that provides a constant-current IEPE power source, such as the PicoScope 4224 IEPE.

Kit PP697 Contains: TA095, a calibration certificate and an introductory guide.

Technical Specs:

• Sensitivity (± 15%): 10.2 mV/(m/s2)
• Measurement range: ± 490 m/s2
• Frequency range: 0.5 Hz to 10 kHz
• Non-Linearity: ± 1%
• Transverse Sensitivity: ≤ 7%
• Settling Time (within 1% of bias): ≤ 2.0 sec
• Discharge Time Constant: ≥ 0.3 sec
• Excitation Voltage: 18 to 28 VDC
• Constant Current Excitation: 2 to 20 mA
• Output Impedance: <150 Ohms
• Output Bias Voltage: 8 to 12 VDC
• Spectral Noise (10 Hz): 78.5 (micrometre/s2)/sqrtHz
• Spectral Noise (100 Hz): 49.1(micrometre/s2)/sqrtHz
• Spectral Noise (1 kHz): 39.2 (micrometre/s2)/sqrtHz
• Electrical Isolation (Case): >108 Ohms

Enviromental Specs:

• Overload Limit (Shock): 49 050 m/s2 pk
• Temperature Range: -54°C to +121°C
• Enclosure Rating: IP68

Physical Specs:

• Size (Hex x Height): 14 mm x 64 mm
• Weight (with cable): 99.3 g
• Mounting: Stud
• Mounting Thread: 1/4-28 Female
• Mounting Torque: 2.7 to 6.8 Nm
• Sensing Element: Ceramic
• Sensing Geometry: Shear
• Housing Material: Stainless Steel
• Sealing: Molded
• Electrical Connector: Molded Integral Cable
• Electrical Connection Position: Top
• Cable Length: 3 m
• Cable Type: Polyurethane