• Tests Operator's Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms¹: Determines that operator's personnel grounding devices (wrist straps², foot grounders, ESD shoes, smocks³) are functioning correctly.
• Compatible with Single-Wire and Dual-Wire Wrist Straps
• Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds: Reduces time spent testing personal grounding devices used in ESD Control Plans
• Solid-State Test Switch with No Moving Parts: Maintains accuracy of tests and extends the lifetime of the tester
• Split Foot Plate for Testing Foot Grounders (or ESD Shoes): Tests both foot grounders independently at the same time
• 30 Volt Test Signal: Provides accurate tests that are not humidity dependent
• Relay for Use with Automatic Doors or Other Locking Systems: Controls access to ESD Protected Areas
• Optional Stand: Use the SCS stand as an alternate installation method for the Dual Combination Tester
• Calibration Verification: Use the SCS Limit Comparator to check the test limits of the Dual Combination Tester without removing it from the workplace
• NIST Calibrated with Certificated Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products
• 100-240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe

■ Default test limits listed. Additional test settings are noted in the user guide.
■ The Dual Combination Tester can verify both single-wire and dual-wire wrist straps.
■ The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 10⁷ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.