• Dimensions L x W x H: 174.0 x 154.0 x 135.0mm
• Air Consumption: 35 l/min
• Air Pressure: 58 - 87 psi
• Automatic Tool Identification: Yes
• Benchtop Controller: Yes
• Compressed Air Connection (Outer Diameter): 0.23 in
• Compressed Air Connection Accessory: Oil free, dry compressed air
• Desoldering: Yes
• Equipotential Bonding: Yes
• Equipotential Bonding Socket: Via 3.5mm Pawl Socket on Back of Device
• ESD Safe: Yes
• Fuse: T2A
• Interface: 1x USB, 2x RS232, 1x Switching Output
• IPC Compliant: Yes
• Maximum Volume: 0.7 bar
• Multilingual Display: Yes
• Number of Channels: 2
• Operating Pressure: 4 - 6 bar 54 - 87 psi
• Power: 200 W (255 W)
• Temperature Accuracy °C: ± 9 °C
• Temperature Accuracy °F: ±17 °C
• Temperature Range (Depends on Tool): 199 - 998°F
• Temperature Range °C: 93 - 537 °C
• Temperature Range °F: 199 - 998 °F
• Temperature Stability °C: ±2 °C
• Temperature Stability °F: ±4 °C
• Tip Type: WX
• Traceability: Yes
• USB: USB interface of firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types
• Vacuum: 0.5 bar (55 kPA) (8 psi)

The Weller WXD2 Digital Desoldering Station is a dual channel power unit that is ideal for use with the WXDP120 and WXDV120 desoldering irons. Key settings are stored directly in the desoldering tools; as a result, there is no need to enter control data into the power unit, saving time-consuming set up. Featuring a fast-action Venturi system, the WXD2 produces a controlled vacuum via an external compressed air source. The maximum power output of the 255W WXD2 control unit reaches up to 200W, allowing for use of all WX series tools. The WXD2 can provide 200W from a single output or two 120W if both ports are in use. The unit's connection cable can connect the control unit to external devices such as hot plates and fume extraction units. The WXD2 furthermore features a straightforward and multi-lingual menu navigation system, which keeps the need to familiarize yourself to the Weller WXD2 at a minimum. The turn-and-click wheel allows for intuitive operation as well.

• 2-Channel Power Unit, 200 W (255 W)
• Cost effective because only one station is needed
• Less rework by optimal use of tools and the correct working temperature
• Reduction of running costs by longer tip lifetime
• Desoldering iron with stand-by mode