FT-630 Wick Cutter

The HAKKO FT-630 Wick Cutter is an industry first, allowing you to quickly and cleanly trim solder wick without the need to reach for cutters. A built-in tray collects the cut off wick trimmings, which easily detaches and the debris can be discarded without leaving a mess behind on your work area.

Features:

• The FT-630 can cut most common sizes of wick, even when loaded with solder, and can also be used to pre-cut the wick to selected lengths for use. The enclosed cutting system collects the trimmings which mitigates debris on the workbench.
• You can adjust the type of cut and the hold on the wick using the dial located on the face of the FT-630.
• The debris tray can be found just under the cutters, this tray can be easily removed to discard wick trimmings.
• You can change out the cutter by removing the hexagon wrench that is found on the underside of the FT-630. Inserting it into the gear hole and rotating it until the blades of the cutter open. Next insert the hexagon wrench into the access hole to push out the cutter.

Specifications:

• Rating: 24 VDC 170 mA
• Power Adapter Input: 100-240VAC
• Output: 24VDC 200mA 4.8W
• Compatible Wick Size: 0.7 to 3.8 mm
• Cutting Length: 2.5 to 30 mm
• Dimensions (W x H x D): 100 x 61 x 92 mm (3.9 x 2.4 x 3.6 in.)
• Weight: 280 g (9.9 oz.)
• ESD Safe: Yes

What's in the box?

• FT-630 Wick Cutter
• B3528 Power Adapter
• Instruction Manual