Techni-Tool
Instek
Instek

Instek GPP-3650 (GPIB) DC Power Supply, Triple Output, 2x 36 V / 5 A, 385 W, RS-232, GPIB, GPP Series

Our Part #20002660

Condition:New

Mfr Part #GPP-3650 (GPIB)

Instek GPP-3650 (GPIB)
Instek
Instek

Instek GPP-3650 (GPIB) DC Power Supply, Triple Output, 2x 36 V / 5 A, 385 W, RS-232, GPIB, GPP Series

Our Part #20002660

Condition:New

Mfr Part #GPP-3650 (GPIB)

CA Prop 65
$1,184.00EACH
Calif. Prop 65

Features

  • 4.3”TFT LCD Display
  • Setting resolution: 1mV / 0.1mA; read back resolution: 0.1mV / 0.1mA
  • Low ripple noise: ≦1mVrms/ ≦2mArms
  • Transient response time: ≦100µS
  • Load function (CC, CV, CR mode)
  • Tracking series and parallel function without additional external wiring
  • Utilizing hardware to realize over voltage protection / over current protection / over temperature protection
  • Delay function / output monitoring function / output recorder function
  • Supports setting value, measurement value and output waveform display
  • Sequential output function and built-in 8 template waveforms
  • The output recorder function records the output voltage & current parameters with a minimum recording interval of 1 second
  • Provides 10 sets of memory for each sequence/delay/recorder/panel setting condition
  • Supports a USB (Type A) output terminal
  • Intelligent temperature control fan effectively reduces noise
  • Standard: RS-232, USB, LAN, Ext I/O; Optional(manufacturer installed only): GPIB
    • Select GPIB port in the Interface after connecting the GPIB cable. The message GPIB will appear gray in the status bar when connection, and turns to white color while the first command connects succesfully.

GPP-3060/6030/3650 triple-channel programmable DC power supplies are extension models of the GPP-X323 series. The maximum output power of these three models is 385W.

GPP-3650 supports CH1/CH2: 0 ~ 36V / 0 ~5A output; CH3 supports 1.8V, 2.5V, 3.3V, 5.0V/5A.

GPP-3060/6030/3650 inherit the high program resolution (1mV/0.1mA) and read back resolution (0.1mV/0.1mA) of the GPP series with low-ripple noise characteristics ≦1mVrms/≦2mArms and ≦100µs output transient recovery ability. An independent output on-off switch is provided for each channel.

The unique load function of the GPP series can arbitrarily set CH1/CH2 as power supply or load function. For example, one channel is set as power output, and the other channel is set as load function to consume the power of the DUT to satisfy simple battery charging and discharging or load characteristic test by a single power supply.

Applications

  • Scientific research and experimental testing
  • Battery charging and discharging test
  • Electronic parts test
  • 3C electronic product test

BrandInstek
Output Voltage1.8V/2.5V/3.3V/5V, 30V x 2
Output Current5A
Power Rating385 W
Input Voltage100/120/220/230 VAC
InterfaceGPIB,USB,LAN,RS-232
Special FeaturesSeries, Parallel Modes
Display4.3 TFT LCD
Depth14.3"
Height5.7"
Number of OutletsTriple Output
ProgrammableYes
Width8.4"
$1,184.00EACH