Digilent ADP5470 Mixed Signal Oscilloscope w/ BNC Probes

Features and Specifications

• Analog Inputs

  • Number of Channels: 4 BNC input channels
  • Input Type: Single-ended, non-isolated
  • Bandwidth (-3 dB)²: 350 MHz
  • Maximum Sample Rate: 1.5 GS/s per channel
  • 8-bit resolution, 40 V peak to peak

  • Up to 1 million samples per channel record length

• Analog Outputs

  • Number of Channels: 1 BNC output channel
  • Bandwidth: 20 MHz
  • Sample Rate: 125 MS/s
  • 14-bit resolution, up to +/-12 V AC amplitude

  • Up to 1 million sample output buffer

• Power Supplies

  • Up to 3 A output on the 6 V rail, up to 1 A each on the +/-25 V rails

  • Integrated hardware readback of voltage and current output for each rail

• CAT II Digital Multimeter (DMM)

  • Functions: DC voltage, AC voltage, DC current, AC current, resistance, diode, continuity
  • 5 1/2 digits resolution and 5 S/s sample rate
  • Voltage measurement up to 300 V

  • Current measurement up to 10 A (A measurements) and 100 mA (mA measurements)

• Digital Inputs

  • 34 channels
  • 0 to 5 V, with configurable 0 to 2 V threshold
  • Max sampling rate: 1 GS/s

  • Up to 1 million sample points total record length

• Digital Inputs and Outputs

  • 8 channels that can be used with virtual I/O devices in software
  • Input logic standard: 5 V compatible TTL

  • Output logic standard: 3.3 V LVTTL

• Waveform Generator (WaveGen)

  • Number of Channels: One
  • Standard Functions: Sine, square, triangle, pulse, ramp, DC voltage, noise, others

  • Resolution: 14 bits

• Logic Analyzer

  • 34 digital inputs with configurable voltage threshold

  • Up to 1 GS/s per channel

• Power Requirements

  • Voltage Input Range: 120 VAC to 240 VAC, 50/60 Hz

  • Power Consumption: 150 W

• Connectivity

  • USB 2.0 Hi-Speed

  • Ethernet for device control

• Software Support

  • Digilent’s WaveForms software on Windows
  • WaveForms SDK for custom applications and scripting through C/C++, Python, C#, Visual Basic

  • LabVIEW support

• Product Compliance

  • HTC: 8471809000
  • ECCN: 3A992.a

Bolster Your Benchtop with Boldest Analog Discovery Yet

The Analog Discovery Pro ADP5470 is Digilent’s most advanced mixed signal oscilloscope (MSO) to date, offering higher sample rates, broader bandwidth, and increased power for your benchtop.

Calling the ADP5470 merely a mixed signal oscilloscope would be an understatement. It features an integrated CAT II Digital Multimeter, three programmable power supplies, a dedicated trigger line, and an arbitrary waveform generator to enhance the mixed signal oscilloscope.

Additionally, it is powered by Digilent’s WaveForms software, with everything included in a one-time hardware purchase. The ADP5470 MSO is more than just a tool – it represents uncompromised analysis.

Front Panel Features

Analog Discovery Pro 5000 Series - The Ultimate All-In-One Test System

The Analog Discovery Pro 5000 Series (ADP) devices integrate a comprehensive set of instruments into one unit, offering flexibility and programmability as mixed-signal oscilloscopes (MSO). They come with either two or four analog input channels, with bandwidths and sample rates ranging from 100 MHz at 1 GS/s to 500 MHz at 2 GS/s. Each device in the series includes 34 digital channels with 1 GS/s inputs, a tri-output programmable power supply up to 25 V, an external trigger, a Waveform Generator, and an integrated DMM.

This Series offers multiple trigger options. Instruments within WaveForms can cross-trigger by initiating an oscilloscope capture when the Waveform Generator starts. Additionally, external signals can trigger events through the dedicated external trigger input/output. Digilent's WaveForms software includes these configurable features within the instruments, or for enhanced control and automation via available scripting interfaces.

Series Models

• ADP5250 (2 input, 100 MHz, 1 GS/s)
• ADP5470 (4 input, 350 MHz, 1.5 GS/s)
• ADP5490 (4 input, 500 MHz, 2 GS/s)

What's in the Box

• One (1) ADP5470 Oscilloscope
• One (1) USB A to B cable
• One (1) 1x14 Digital I/O Screw Terminal Adapter
• One (1) 2x20 Logic Analyzer MTE Cable
• Four (4) T2500 500 MHz x1/x10 Oscilloscope Probes
• One (1) Digilent Screwdriver
• One (1) Set of Red and Black DMM Probes
• One (1) US IEC Cable, with EU and UK adapters